User Manual

How to use a power adapter:
Inspect the plug, check to ensure the prongs are pointing straight-away from the surface of
the plug-face, and not on an angle more than 10-degrees.
Inspect the cable, check to ensure the cable is not cut, sliced, or gouged, exposing bare-wire
or the inner-jacket of the wire.
Inspect the power adapter, check to ensure there isn’t any water on the product. If there is,
remove water using a lint-free cloth/towel, then place the product in a warm and dry
atmosphere for 24-hours to remove the remaining water.
The appropriate way to plug in a power adapter involves plugging the receptacle in first,
then plugging the plug into the load-source. Ensure power is flowing, and enjoy.