Installation and Operation Manual

CONNECT USING HDMI

NOTE: Before connecting, please disconnect power.

1. Connect as the figure above.(TV 2, TV 3 are optional to connect)

4. Play the audio or video through DVD player as usual and set to the desired volume.

2. Power ON the unit.

TV 2

Yellow

TV 3

HDMI OUT

HDMI Cable (not supplied)

MAIN TV

(ARC)

VIDEO OUT

Video Cable not supplied

Yellow

To HDMI IN on MAIN TV

5. When playback through the MAIN TV by HDMI, only " HDMI " will appear on display, press the ARC

appear on display.

( Audio Return Channel) button on remote control to transmit the audio from the MAIN TV to the unit

and play through the unit, "ArC" will

3. Press the button on remote control or touch the button on unit repeatedly until " DVD HDMI "

appears on display.

Press the ARC button again to resume normal

playback.

back to ARC mode.

NOTE:

No matter which mode the unit is in, press the ARC button on remote control to switch

The TV must have the ARC capability, and HDMI connected to HDMI ARC jack on capable TV.