User Manual

Doc P/N: 9040962 | Rev 01 | Printed 22 July 2016
6
CONNEX ProSight Installation and Operation Guide
Introduction to CONNEX ProSight|Quick Installation Layout
Navigation pane
Quick Installation Layout
Home Page
Safety
Introduction to CONNEX
1.
Connect camera
3.
Connect to flight
controller
4.
Connect transmitter power
ProSight
Opening the Package
Installing the Units
Operating the Units
Configuration Using
ProSight Desktop
Application
Configuration Using
ProSight Mobile
Application
Specifications
5. Connect HD
receiver power and
video
2.
Connect antenna cables
Keep the camera cable
as far as possible from
any high power cables
and ESCs.
Flight controller
For best range and link
robustness, route the cable
away from the antenna body.
Appendices
Pairing with an additional receiver/transmitter
6.Verify
communication
The delivered transmitter and receiver are already paired.
Connect the units with a USB cable and USB to USB OTG adapter.
Paring is done automatically. Verify link LED is constantly ON.
2S- 4S battery,
7-17V
2S- 4S battery,
7-17V
Caution:
The antenna cable minimum
bend radius is 5mm.