User Manual

Doc P/N: 9040962 | Rev 01 | Printed 22 July 2016
15
CONNEX ProSight Installation and Operation Guide
Installing the Units|Connecting Components to Drone
Navigation pane
Mounting the Camera
Home Page
Safety
Introduction to CONNEX
ProSight
Opening the Package
Installing the Units
Operating the Units
Configuration Using
ProSight Desktop
Application
Configuration Using
ProSight Mobile
Application
Specifications
Appendices
Mount the camera on the front of the drone mounting plate.
The rubber vibration dampers serve as shock absorbers and help
reduce the “Jello” effect in the incoming video.
1. Insert the rubber dampers (3) through the mounting holes in the
camera base (2) and in the drone mounting plate (1).
2. Secure the damper pins (4) and locking clips (5).
4
4
5
2
1
3
Tip:
The camera can be installed using screws instead of dampers.