User Manual

Unscrew the Bottom of the water leak sensor and insert 2 x AA batteries
provided.
How to Reset the Device
• Reset the water leak by pressing and holding the button for
6 seconds until the indicator light ashes rapidly. You will then be in
“Easy Mode”, fast blinking light, 2 x per second.
• Reset again pressing and holding the button for 6 seconds until
the indicator light ashes slowly. You will then be in “AP Mode”,
which is the back-up mode of connection, slowly ashing once every
3 seconds.
Plug In and Connect
Step
3
7
1. Reset
1