User Manual

Plug In and Connect

Step

Plug in the Connex Connect Universal Remote and switch on.

(The universal remote LED will ash repeatedly, 2 x per second: Easy Mode)

How to Reset the Device

• Reset the universal remote by pressing and holding the button for

3 seconds until the indicator light ashes rapidly. You will then be in “Easy

Mode”, fast blinking light, 2 x per second.

• Reset again by pressing and holding the button for 3 seconds until

the indicator light ashes slowly. You will then be in “AP Mode”,

which is the back-up mode of connection, slowly ashing once every

3 seconds.