Installation Guide

6
Need help? Visit support.connects2.com/tickets/technical
CTKFT34_IG_v1
The brackets within the kit consist of a set
of spacers (i.), a set of plates (ii.) and a set
of release keys (iii.). This set up allows you
to set a precise depth to the brackets.
Take the spacers and place them on the
inside of the plates. When lined up, attach
the assemblies to both sides of the head
unit (screws not provided).
Once placed, you can insert the head unit
into the cage/fascia to gauge the correct
depth and use the release keys to alter if
incorrect.
BRACKET ASSEMBLY
ii.
i.
iii.
PRIOR TO INSTALLATION
Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation
must be free of moisture and away from heat sources. Please ensure that the correct tools are used during the
installation to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation
of this product.
Begin by using a panel removal too to
unclip the entirety of the side air vents.
Once free, simply pull them out of the
dashboard and set them to one side.
1.
INSTALLATION GUIDE - FASCIA
DASH DISASSEMBLY
With the air vents removed, undo the 4x
screws that surround the main head unit.
Once undone, simply pull the fascia away
from the dashboard and disconnect all of
the wiring.
2.
3.