Installation Guide

ManualsBrandsConnects2 ManualsFitting KitCONNECTS2 CTKFT34 Car Stereo Fitting Kit

CTKFT34

Complete Installation Kit

for Fiat vehicles

APPLICATION

FEATURES

Fiat Ducato (8 Series) 2021 - UP

• Allows for the installation of a double DIN aftermarket stereo

• Comes complete with accessories for tment of single/double DIN stereo

• Retains steering wheel control & phone button functionality

• Retains vehicle settings and generates setting menus

• Provides outputs for Park Brake, Reverse Gear and Speed Pulse

• Includes additional accessories including antenna adapters and patch lead

• Finished in black to match the vehicles dashboard

The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This

instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the

vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein.

Note: Application data is subject to change at any time

DISCLAIMER

CTKFT34_IG_v1

i. Double DIN Fascia

ii. Cage, Brackets & Accessories

iii. Steering Wheel Interface & Harness

IN THE KIT

ii.

iv.

iii.

iv. Antenna Adapter

v. Universal Patch Lead

Summary of content (12 pages)

PAGE 1
CTKFT34 Complete Installation Kit for Fiat vehicles i. ii. iv. v. iii. IN THE KIT i. ii. iii. Double DIN Fascia iv. Cage, Brackets & Accessories v.
PAGE 2
PRODUCT INFORMATION The CTKFT34 is a complete installation kit that allows for the fitment of an aftermarket head unit into the OEM dashboard of Fiat Ducato (8 Series) vehicles. The interface provided helps retain steering wheel control presets and phone button functionality, as well as retaining vital features and functions which include OEM vehicle settings. The lead features plug-and-play connectors for an easier installation process.
PAGE 3
STEERING WHEEL CONTROLS EXAMPLE STEERING WHEEL CONTROL DIAGRAM The following diagram, though based on careful research, is an example only. Individual steering wheel control configurations may differ. The Infodapter will retain several of the vehicle’s original steering wheel control functions including moving up and down between tracks, adjusting the volume and picking up or hanging up calls.
PAGE 4
FASCIA DIAGRAM Need help? Visit support.connects2.
PAGE 5
WIRING DIAGRAM FM/Blue Phantom Power Connections Connect to aftermarket stereo Fakra Antenna Connection Connect to OEM Antenna connector from vehicle 12-Way/32-Way Connector Connect to relevant connectors from vehicle Flying Wires Pink - Speed Pulse Green - Park Brake Purple/White - Reverse Gear ISO Connector Connect to aftermarket stereo Aftermarket Camera RCA Connector Connect camera input to female phono connector (optional) Male Yellow RCA Connector Connect to aftermarket radio camera input Main
PAGE 6
PRIOR TO INSTALLATION Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. Please ensure that the correct tools are used during the installation to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product. INSTALLATION GUIDE - FASCIA DASH DISASSEMBLY 1. Begin by using a panel removal too to unclip the entirety of the side air vents.
PAGE 7
INSTALLATION GUIDE - FASCIA DASH ASSEMBLY 4. Take the cage from within the kit and place it within the new fascia, locking it into place using the tabs surrounding the outside. 5. With the cage in place, and the head unit connected correctly, proceed to slot the radio into the dashboard until it clips into place. Carry on to finish the installation by placing the trim around the head unit and re-assembling the dashboard in revere order.
PAGE 8
INSTALLATION GUIDE - WIRING See Wiring Diagram on Pg.4 for more information Before installing the interface, the factory stereo must be removed and disconnected. To do this, please consult the vehicle owner’s manual/handbook or contact a fitting professional. For universal patch leads, prepare the wiring loops in accordance with the instruction manual supplied before installation. 1. Connect the 12 Pin connector from the stereo connection (patch) lead to the interface box 2.
PAGE 9
INFODAPTER MENU Once the CTKFT03 has been installed into the vehicle successfully, simply hold the ‘Speech’ button (Fig.8) on the steering wheel to access the ‘Configuration Menu’. Note: In the case that the vehicle does not feature phone buttons, the ‘Source’ button will act as Infodapter enter/exit button. The Infodapters ‘Configuration menu’ showcases a series of options and settings that can be altered to tailor the users experience.
PAGE 10
INFODAPTER MENU SCREEN SIZE/POSITION Allows the user to setup the Infodapter display screen to the exact size of the aftermarket head unit being fitted. PICTURE SETTINGS Allows the user to adjust the Brightness, Contrast and Saturation levels of the Infodapter menus/parking graphics. PREFERENCES • Park Assist Version Select according to the colour configuration of the park assist fitted to the vehicle.
PAGE 11
NOTES 11 CTKFT34_IG_v1
PAGE 12
NOTES Need help? Visit support.connects2.