Installation Guide

5
CTKFT33_IG_v1
PRIOR TO INSTALLATION
Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation
must be free of moisture and away from heat sources. Please ensure that the correct tools are used during the
installation to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation
of this product.
To begin, use a panel removal tool to
unclip the climate control button panel.
Be careful not to damage the surrounding
trim.
1.
INSTALLATION GUIDE - FASCIA
DASH DISASSEMBLY
Once the climate control button panel is
out of the way, proceed to undo the 2x torx
screws located at the top of the aperture.
2.
Now open the glovebox, within the lip on
the far side nearest to the passenger side
door will be a recessed torx screw. Once
this screw has been undone, proceed to
fully remove the dashboard trim by means
of a panel removal tool, disconnecting the
button panel in the process.
3.