Installation Guide

ManualsBrandsConnects2 Manualscar stereoCONNECTS2 CTKFT33 Double Din Car Stereo

CTKFT33

Complete Installation Kit

for Fiat vehicles

APPLICATION

FEATURES

Fiat 500 2015 - 2021

• Allows for the installation of a double DIN aftermarket stereo

• Comes complete with accessories for tment of double DIN stereo

• Retains vehicle settings, steering wheel control & phone button functionality

• Generates vehicle setting menus and parking sensor graphics

• Provides outputs for park brake, reverse gear and speed pulse

• Includes additional accessories including antenna adapters and patch lead

• Finished in black to match the vehicles dashboard

The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This

instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the

vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein.

Note: Application data is subject to change at any time

DISCLAIMER

CTKFT33_IG_v1

Please Note: this kit is for facelift models only.

i. Double DIN Fascia

ii. Brackets & Accessories

iii. Vehicle Interface & Harness

IN THE KIT

ii.

iv.

iii.

iv. Antenna Adapter

v. Universal Patch Lead

Summary of content (8 pages)

PAGE 1
CTKFT33 Complete Installation Kit for Fiat vehicles ii. i. v. iv. iii. IN THE KIT i. ii. iii. Double DIN Fascia Brackets & Accessories Vehicle Interface & Harness iv. v. Antenna Adapter Universal Patch Lead APPLICATION Note: Application data is subject to change at any time Fiat 500 2015 - 2021 Please Note: this kit is for facelift models only.
PAGE 2
PRODUCT INFORMATION The CTKFT33 is a complete installation kit that allows for the fitment of an aftermarket head unit into the OEM dashboard of Fiat 500 vehicles. The interface provided helps retain steering wheel control presets as well as retaining vital features and functions which include the OEM vehicle settings and parking sensors (if applicable). The lead features plug-and-play connectors for an easier installation process.
PAGE 3
FASCIA DIAGRAM 3 CTKFT33_IG_v1
PAGE 4
WIRING DIAGRAM FM/Blue Phantom Power Connections Connect to aftermarket stereo Fakra Antenna Connection Connect to OEM Antenna connector from vehicle Vehicle Speciﬁc Connector Connect to relevant connector from vehicle Flying Wires Pink - Speed Pulse Green - Park Brake Purple - Reverse Gear ISO Connector Connect to aftermarket stereo Aftermarket Camera RCA Connector Connect camera input to female phono connector (optional) Male Yellow RCA Connector Connect to aftermarket radio camera input Main Wirin
PAGE 5
PRIOR TO INSTALLATION Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. Please ensure that the correct tools are used during the installation to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product. INSTALLATION GUIDE - FASCIA DASH DISASSEMBLY 1. To begin, use a panel removal tool to unclip the climate control button panel.
PAGE 6
INSTALLATION GUIDE - FASCIA DASH DISASSEMBLY 4. With the dashboard trim panel out of the way, proceed to undo the 4x highlighted torx screws that surround the main fascia trim. Once free, pull upwards away from the dash. 5. When the main fascia trim has been removed, undo the 4x screws found on either side of the main unit and proceed to pull it out of the dash whilst disconnecting all of the wiring.
PAGE 7
INSTALLATION GUIDE - WIRING See Wiring Diagram on Pg.4 for more information Before installing the interface, the factory stereo must be removed and disconnected. To do this, please consult the vehicle owner’s manual/handbook or contact a fitting professional. For universal patch leads, prepare the wiring loops in accordance with the instruction manual supplied before installation. 1. Connect the 12 Pin connector from the stereo connection (patch) lead to the interface box. 2.
PAGE 8
ACCESSING CONFIGURATION MENU VEHICLE SETTINGS Vehicle Settings Display Clock Safety & Driving Assistance Lights Doors & Locks < Back The Infodapter interface retains the ability to adjust vehicle settings that were present when the original head unit was installed. The ‘Vehicle Settings’ menu contains a variety of original vehicle settings. Vehicle setup options that were available with through the original head unit will now be available through the aftermarket head unit.