Installation Guide

6
Need help? Visit support.connects2.com/tickets/technical
CTKFT32_IG_v1
Using the 4x phillips screws, take the
brackets and line them up to the following
posts on the rear of the new fascia panel
and proceed to attach them to the relevant
side.
4.
INSTALLATION GUIDE - FASCIA
FASCIA ASSEMBLY
Once the brackets are xed to the fascia,
take the new stereo and slide it in the back
toward the opening. Lining the stereo up
correctly, use the screws/washers within
the kit to attach it according to the correct
depth.
DASH ASSEMBLY
5.
ii.
i.
iii.
Once the kit has been assembled and the
wiring for the stereo is completed, simply
use the clips within the kit on the reverse
of the fascia and proceed to clip it into
place.
6.