Installation Guide

ManualsBrandsConnects2 ManualsVehicle IntegrationCONNECTS2 CTKFT32 Vehicle Integration

CTKFT32

Complete Installation Kit

for Fiat vehicles

APPLICATION

FEATURES

Fiat Ducato (X290) 2014 - 2021

• Allows for the installation of a double DIN aftermarket stereo

• Comes complete with accessories for tment of double DIN stereo

• Retains vehicle settings, steering wheel control & phone button functionality

• Generates vehicle setting menus and parking sensor graphics

• Provides outputs for park brake, reverse gear and speed pulse

• Includes additional accessories including antenna adapters and patch lead

• Finished in black to match the vehicles dashboard

The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This

instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the

vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein.

Note: Application data is subject to change at any time

DISCLAIMER

CTKFT32_IG_v1

Please Note: this kit is for facelift models only. Vehicle will need modication, familiarise yourself with instructions before installation.

i. Double DIN Fascia

ii. Brackets & Accessories

iii. Vehicle Interface & Harness

IN THE KIT

ii.

iv.

iii.

iv. Antenna Adapter

v. Universal Patch Lead

Summary of content (8 pages)

PAGE 1
CTKFT32 Complete Installation Kit for Fiat vehicles i. ii. v. iv. iii. IN THE KIT i. ii. iii. Double DIN Fascia Brackets & Accessories Vehicle Interface & Harness iv. v. Antenna Adapter Universal Patch Lead APPLICATION Note: Application data is subject to change at any time Fiat Ducato (X290) 2014 - 2021 Please Note: this kit is for facelift models only. Vehicle will need modification, familiarise yourself with instructions before installation.
PAGE 2
PRODUCT INFORMATION The CTKFT32 is a complete installation kit that allows for the fitment of an aftermarket head unit into the OEM dashboard of Fiat Ducato (X290) vehicles. The interface provided helps retain steering wheel control presets as well as retaining vital features and functions which include the OEM vehicle settings and parking sensors (if applicable). The lead features plug-and-play connectors for an easier installation process.
PAGE 3
FASCIA DIAGRAM 3 CTKFT32_IG_v1
PAGE 4
WIRING DIAGRAM FM/Blue Phantom Power Connections Connect to aftermarket stereo Fakra Antenna Connection Connect to OEM Antenna connector from vehicle Vehicle Specific Connector Connect to relevant connector from vehicle Flying Wires Pink - Speed Pulse Green - Park Brake Purple - Reverse Gear ISO Connector Connect to aftermarket stereo Aftermarket Camera RCA Connector Connect camera input to female phono connector (optional) Male Yellow RCA Connector Connect to aftermarket radio camera input Main Wiri
PAGE 5
PRIOR TO INSTALLATION Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. Please ensure that the correct tools are used during the installation to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product. INSTALLATION GUIDE - FASCIA DASH DISASSEMBLY 1. Use a set of release keys to pry the head unit out of the dashboard.
PAGE 6
INSTALLATION GUIDE - FASCIA FASCIA ASSEMBLY 4. Using the 4x phillips screws, take the brackets and line them up to the following posts on the rear of the new fascia panel and proceed to attach them to the relevant side. iii. ii. i. Once the brackets are fixed to the fascia, take the new stereo and slide it in the back toward the opening. Lining the stereo up correctly, use the screws/washers within the kit to attach it according to the correct depth. 5.
PAGE 7
INSTALLATION GUIDE - WIRING See Wiring Diagram on Pg.4 for more information Before installing the interface, the factory stereo must be removed and disconnected. To do this, please consult the vehicle owner’s manual/handbook or contact a fitting professional. For universal patch leads, prepare the wiring loops in accordance with the instruction manual supplied before installation. 1. Connect the 12 Pin connector from the stereo connection (patch) lead to the interface box. 2.
PAGE 8
ACCESSING CONFIGURATION MENU VEHICLE SETTINGS Vehicle Settings Display Clock Safety & Driving Assistance Lights Doors & Locks < Back The Infodapter interface retains the ability to adjust vehicle settings that were present when the original head unit was installed. The ‘Vehicle Settings’ menu contains a variety of original vehicle settings. Vehicle setup options that were available with through the original head unit will now be available through the aftermarket head unit.