User`s manual

Master Audio
PA208A.Ver 1.1 Nov 09 17
g) LIMITER: Prevents the amplifier outputs from overdriving the transducers. When
the LIMITER indicators are active, they are in red colour. The LIMITER indicators can
be in red occasionally, but if they are continuously activated, turn down the level
control until the LIMITER indicators are only in red occasionally.
h) HF output level: -3dB/0dB/3Db high frequency output level control.
A B F E C D
H G
Fig.4. PA-208A connection panel
Always use mains power cable supplied by manufacturer.
Never connect the PA-208A to an unearthed mains supply or by using an
unearthed mains cable.
3. CONNECTING
Connect the signal (mixing desk output) to INPUT on the first unit. Use the LINK
output to transfer the INPUT signal to the second unit and thus sequentially for further
units. All of the units in this chain must be switched on.
For the mains connection in parallel use the cable with grey Neutrik PowerCon
NAC3FCB at one end and the blue Neutrik PowerCon NAC3FCA at the other end.
Do not connect more than six PA-208A units using the AC Stacking
output connector.
Do not connect PRO series units in parallel using PowerCon- PowerCon
without earth.