User`s manual

Master Audio
PA208A.Ver 1.1 Nov 09 14
1. INTRODUCTION
1.1.General product information
Master Audio thank you for the trust placed in our PRO series loudspeaker systems.
The PA208A combines the benefits of the line array sources, the convenience of a
self-powered, processed system and the flexibility of use (as a PA cabinet with or
without subwoofer).
More than 35 years’ experience in amplifier and acoustic cabinet design using the
highest technology and components come together to give you a product ideal for a
multitude of applications, from sound back-up systems for theatres, clubs or TV
channels to even churches, corporative events or medium format concert halls.
Thanks to its accurate design, several units of the PA208A perform as a single unit,
without sound “holes” on the vertical plane.
We suggest you read the following information with attention, assured that it will be of
maximum use in helping you to achieve the best results and optimum performance.
1.2. Features and appearance PA-208A
- Self-powered cabinet.
- 500W amplifier for low-mid range.
- 120W amplifier for high range.
- 24dB/oct active crossovers and signal processing circuits.
- Independent clip limiters for each way.
- Balanced inputs & outputs (XLR).
- 2 x 8” neodymium woofers (2” voice coil).
- 2 x 6” neodymium ribbons.
- Birch plywood construction.
- Black textured paint finish: totally ecological.
- Adjustable pole mount socket for a standard 35mm tripod.
- Frontal steel grille with acoustically transparent black foam.
2. PA-208A General characteristics
The PA-208A cabinet comes with self-powered control, full range sound delivery and
acoustic bass reflex cabinet. As a full range system, its response is 70-19kHz (+/-
3dB) with a usable bandwidth between 60Hz-20kHz (-10dB).
The PA-208A is connected using the XLR balanced connector. Mains supply is
through PowerCon at 230V.