Specifications

Chapter 5: Using ConnectPro 30
Chapter 5: Using ConnectPro
TheconnectionbetweenthemobiledeviceandConnectProisreferredtoastheClient-proxy
connectionandishandledbytheproxyservice.TheconnectionbetweenConnectProandthe
hostisreferredtoastheproxy-hostconnectionandishandledbythehostservice:
Process Overview
TheConnectProservermayresideonthesamemachineasthehost.
EachemulationsessionisidentifiedbyauniquesessionIDwhenitisestablishedthrough
ConnectPro.Thisallowsmultipleemulationsessionsononemobiledevicetobeestablished
throughConnectPro.
To initiate an emulation session with ConnectPro:
1 AddproxyserviceandhostserviceconfigurationsusingtheConnectProwebinterface.
2 AddahostprofilewithinformationabouttheConnectProserverfromtheTEClient
configurationutility.
3 ConnecttothehostusingConnectPro.
NOTE:Ifyouareusingafirewall,makesureyouhaveproperlyconfiguredyourstaticNAT
tablesandaccesslists.