Specifications

Chapter 4: Configuring the Client for ConnectPro 28
Configuration
Option
Description
Address EntertheIPaddressoftheConnectPro/TermProxyserver.
Port EnterthePortoftheConnectPro/TermProxyserver.
Terminate
TermProxy
Session
IndicateswhentheConnectPro/TermProxyservershouldterminatethe
connectiontothehost.
PossibleValues:
• Never.Theproxyserverneverterminatesthesessionestablishedwith
thehost.TheClientisresponsibleforterminatingthesession.
• On Network Error.Theproxyserverterminatesthesessionwiththe
hostwhenanetworkerroroccurs,suchasalossofnetwork
connectivity.
• On Session Exit.Theproxyserverterminatesthesessionwiththehost
whenthesessionisterminatedbytheClient.Thisisthedefaultvalue.
• Always.Theproxyserverwillterminatethesessionwiththehostona
networkerrororwhenthesessionisterminated.
Reconnect
String
Areconnectstringrequeststhelastscreendatathatthehosthadbeforethe
mobiledevicedisconnected.Inputareconnectstringoruseoneyou
definedintheConnectProconfigurationfile.Thereconnectstringinthe
hostprofiletakesprecedenceoverthereconnectstringintheConnectPro
configurationfile.
Requirementsforconnectstringsdependupontheapplication,butthe
stringsarerequiredin5250and3270environments.Formoreinformation
onreconnectstrings,seeConfiguringReconnectStringsonpage18.
UseSSL/TLS
encryption
EnableUse SSL/TLS encryptiontoencryptdatabetweenthemobiledevice
andtheConnectProserver.
Formoreinformation,seeUsingSSL/TLSwithConnectProonpage29.
Verifyserver
certificates
EnableVerify Server CertificatestoperformSSL/TLSverificationbetween
themobiledeviceandtheConnectProserver.
SSL/TLSverificationrequiresalocalcertificatechain(rootcertificateand
intermediatecertificatesifany)onthemobiledevice.