User`s guide

5
User’s Guide
User’s Guide
3. OMS will then ask which ports you would like
to search for MIDI interfaces. If your MIDI
device is USB or PCI you do not need to check
anything.
4. Once OMS is done searching for your MIDI
interfaces, you will see the screen below.
Make sure your MIDI device is listed. If it is
not listed, double check its connection and
power and try searching again.
5. Click OK. When the search is complete, you
should see a new device listed. Check the
box(es) next to the device’s MIDI ports and
click OK.
6. OMS will now ask you to save your OMS
Studio Setup.
7. Now that you have configured OMS for your
MIDI interface, you need to setup your MIDI
controller device.
8. The Controller device may appear as a
keyboard with a question mark in it the first
time you run this setup.
9. Double-click the controller device icon (or the
keyboard/question mark icon). This opens the
device configuration window. In this window,
make sure the Manufacturer is Mackie, the
Model is other, and the name is HUI.
10. Repeat step 9 for any Extenders that are in use,
naming them HUI 2, HUI 3, and HUI 4.
11. Once you are done configuring the controller,
click OK. Save the OMS Studio Setup and quit
OMS.