User`s guide

12
Mackie Control HUI Mode
Mackie Control
[14] BANK
• Pressing the left or right BANK button jumps
over to the next adjacent eight channels on
either the left or right side of the current
location.
• If one or more Mackie Control Extenders are
present, the BANK buttons jump over by 8
times the number of devices present. For
example, if two Mackie Control Extenders are
present in addition to the Mackie Control, the
BANK buttons will jump 8 x 3 or 24 channels
at a time.
[15] CHANNEL
• Pressing the left or right CHANNEL button
jumps over to the next adjacent channel on
either the left or right side of the current
location.
[16] INSERT
• The INSERT button is used in combination
with the V-Pot buttons to select a channel for
plug-in editing.
• To select a channel for plug-in and insert
editing, hold the INSERT button down and
press the V-pot on that channel. Once you
have done this, the LCD changes to the Plug-
In view, in which the inserts and plug-ins on
the selected channel can be edited. If the LCD
is already in Plug-In view, and the INSERT
button is pressed, the LCD temporarily changes
to show the channel names for easy navigation
between channels when editing plug-ins.
[17] V-SEL
• Press and hold the V-SEL
button in combination with the
V-Pot buttons to switch the
current send on a channel
between Pre- and Post-fader.
When Send Mute Mode is active
(SEND LED is flashing), this
key combo causes the active
send on a channel to be muted.
[18] METERS buttons
• Press the METERS button to change the LCD
display to indicate channel meters and
scribble-strip names from any other view.
• Press CLEAR PEAKS [19] to clear the peak
indicators on all channel meters.
Note: In the LCD, asterisks (*) are used as peak
indicators.
Window buttons
These buttons open and close the associated
windows in Pro Tools. These include:
• [20] EDIT: Opens and closes the Edit window.
• [21] MIX: Opens and closes the Mix window.
• [22] TRANSPORT: Opens and closes the
Transport window.
• [23] MEM LOC: Opens and closes the
Memory Locations window.
• [24] ALT VIEW: Opens and closes the floating
window for the currently selected plug-in.
Edit buttons
The CUT [25], SEPARATE [26], and PASTE [27]
buttons perform the corresponding editing functions
in Pro Tools.
Automation buttons
These buttons are used in combination with the
V-Pot buttons to arm or disable automation for
individual channels or channel groups. Press and hold
an automation button and press a channel’s V-Pot to
put the channel into the selected automation mode.
EIGHT CHANNEL MASTER CONTROL
F1 F2 F3 F4 F5 F6 F7 F8
DISPL AY
SMPTE
BEATS
NAME
VALUE
EDIT TRANSPORT MEM LOC ALT VIEW CUT SEPERATE PASTEMIX
CLEAR
PEAKS
METERS
PLUG-IN
ASSIGN
COMPARE BYPASS
METERS
FA DER BA NK S
BANK
CHANNEL
ASSIGNMENT
PLUG-INS
PAN
SENDS
I/O
EQ DYN
FLIP
EDIT
FA DER BA NK S
BANK
CHANNEL
SEND
ASSIGN
PLUG-IN
PAN
INPUT OUTPUT
V-SEL
INSERT
VIEW