Installation guide

Jabber XCP Server Installation Guide Planning Your Connection Manager Deployment Page 15
Beta Version Only
• The primary Jabber XCP server’s core router establishes communication with each
remote server using an outgoing router-to-router connection.
• Ports 7400 and 7300 are open on the firewall between the primary Jabber XCP server
and the DMZ. The primary server must be able to open port 7400, which is the core
router’s default Master Accept Port, and 7300 is used to access the Controller on the
remote system during server configuration. Port 7300 must be open only when the
remote system is being configured.
• Port 5222 must be open on the firewall between the DMZ and the Internet for
incoming client connections, and port 5269 must be open bidirectionally if you are
running an S2S CM.