Installation guide

Supported Clients
Jabber XCP Server Installation Guide System Requirements Page 13
Beta Version Only
Supported Clients
Jabber XCP 5.2 has been verified to operate with and is supported for the following
clients:
• Jabber Messenger 3.2.x
• Jabber Messenger for the Web 5.0
SMTP Requirements
If you plan to configure Jabber XCP’s SMTP feature to enable users to send offline
messages to each other, you must have a mail server. The SMTP feature has been verified
with and is supported for SMTP-compatible email servers such as Sendmail v8.x.
SNMP Requirements
The Simple Network Management Protocol (SNMP) is an application layer protocol that
facilitates the exchange of management information between network devices. SNMP has
been implemented on the Jabber XCP server to enable you to use standard SNMP tools to
monitor the server. You can enable or disable the use of SNMP individually for each
server component, including the core router.
To use SNMP with the Jabber XCP server, you must download and install the net-snmp
master agent, version 5.0.9, which is an open source product. (For information about a
security issue in net-SNMP versions before 5.0.9, see
https://rhn.redhat.com/errata/RHSA-2003-335.html
). The net-snmp agent must be
installed on each system on which an SNMP-enabled Jabber XCP component is running.
For information on setting up SNMP, see the “SNMP” chapter in the Jabber XCP Server
Configuration Guide.