Specifications

Installation Instructions
X2O Winches
Step 2: Install the control box by lining it up with the two holes on the motor side upright, then
Secure with the included hardware. (Fig E, F)
(Fig D) (Fig E) (Fig F)
Remote Control
 Do not force end of remote plug into the plug on the control box.
 Line the tab on the inside of the remote socket end with the groove on the remote plug on
the control box. (Fig G,H)
 Push the toggle switch upward to operate the winch “Outward” .Note: You should always
“Free Spool” the winch outward.
 Push the toggle switch downward to operate the winch “Inward”
 The remote features a magnet on the front which enables you to keep the remote off of the
ground by having it placed on your vehicle, bumper, ect. (Fig I)
(Fig G) (Fig H) (Fig I)