User`s manual

User's Manual
z The Software reset: which determines whether or not to reset
the PrintSir.
z
The Restore to factory default: which determines whether or
not to erase all of the PrintSir’s setting and restore to the
default configuration the PrintSir had when it was shipped
from the factory.
z
The Print diagnostic page: which determines whether or not
to print a diagnostic page to a attached printer connected at
either LPT1, LPT2 or LPT3 of the PrintSir. This feature can
be used to test the PrintSir to make sure it is operating
properly, or to isolate any installation problems.
z
The Do it button: do the action specified in the above.