User`s manual

User's Manual
z Alias name, an alternate name by which the PrintSir can be
called (in addition to the PSxxxxxx name printed on the
label).
z
NetWare Protocol Support, which determines whether or not
the PrintSir support NetWare printing function.
z
NetBEUI Protocol Support, which determines whether or not
the PrintSir support NetBEUI network protocol.
z
POST diagnostic printout, which determines whether or not a
diagnostic printout should be printed to the attached printer.
z
Save to PrintSir button: save the configuration to the
PrintSir.
z
Type new password, change to new password.
z
Re-type new password, confirm the new password.
z
Change password button: save the new password to the
PrintSir.
The PrintSir will verify your password (it will ignore the User
Name item) when you save the configuration.
Make sure to reset the PrintSir (described in section 8.3.11
System Utilities ) to let the changes take effect.
8.3.7
Setting IP Address
The IP Cfg page allows you to configure the IP address where the