User's Manual

PAGE 5 / 7
6. Answering a call
When the headset rings, press the TALK button shortly.
7. Rejecting a call
Press the TALK button for about 2 seconds when the headset is ringing.
This function only works in the Hands-Free Profile.
8. Ending a call
Press the TALK button shortly to end an active call.
9. Redial Last Number
Press the TALK button for about 2 seconds if there is no active call and no incoming
call, until you hear a beep.
This function only works in the Hands-Free Profile.
10. Adjusting the volume
The headset has been designed with 2 VOL+ buttons, and 2 VOL- buttons, so that it
is perfectly ergonomic and symmetrical, whether you use it on your left or right ear.
But only 1 VOL+ button is functional to adjust the volume up, and only 1 VOL- is
functional to adjust the volume down.
So to increase the volume during an active call, make sure you press shortly and
gently on both VOL+ buttons simultaneously.
And to decrease the volume during an active call, make sure you press shortly and
gently on both VOL- buttons simultaneously.
11. Muting the microphone
To mute the microphone during an active call
Press on both VOL+ buttons, or on both VOL- buttons, simultaneously for about 2
seconds.
A periodic tone is heard in the speaker while the microphone is muted.
To end the mute function
When the microphone is muted, a short press on both VOL+ buttons, or on both
VOL-, simultaneously will end the mute function and the periodic tone will disappear.
12. Transferring a call to the mobile phone
During an active call, press the TALK button for about 2 seconds.
This function only works in the Hands-Free Profile.