User Manual

Dongle User’Guide Aug02/BtrekRefV1/GpoV1
11. Transferring a Call to the Mobile Phone
When the BlueTrek is in active call, to transfer the call to your mobile phone you only
have to disconnect the cable from the mobile. Normally when you disconnect the cable
both devices should return to standby mode.
If you reconnect it you could use again your headset.
12. Transferring a Call to the headset
When the mobile phone is in active call, to transfer the call to the headset :
1- Switch on BlueTrek and the dongle (both of them are in standby mode, the
dongle is paired with the correct profile programmed),
2- Connect the cable first to the dongle then to the mobile,
3- The audio connection is transferred atomatically (you have to wait 1 to 3
seconds) to BlueTrek and the green led (or red led if voltage battery low)
lights on continuously on the dongle. The conversation can goes on through
BlueTrek.
Comment : if you want to take back your converstation directly on the phone you only
have to disconnect the cable. And if you want to use again the headset you only have to
reconnect the cable (at that stage no need to press any button on the BlueTrek headset,
the link is automatically released).
Page 14 of 16
Innovi Technologies Ltd
Suite 501-3, 5/F, Chinachem Leighton Plaza, 29 Leighton Road, Causeway Bay, Hong Kong
Tel: [phone], Fax: [phone]
Email: [e-mail]
, Web: www.innovi.com