User Manual

Dongle User’Guide Aug02/BtrekRefV1/GpoV1
8. Volume Control
With the use of the dongle you have two ways to adjust the volume :
First you can directly adjust the volume on your phone. Actually the dongle is working
like a wired hands free so that you adjust the volume on your phone.
Secondly you can adjust the speaker volume on BlueTrek by pressing button 1 to
increase the volume or button 2 to decrease the volume.
Comments
: the volume adjustment can be completely different depending on your
phone. So please be sure not to put to high the volume otherwise you might have some
problem like distortion, echo, abnormal vibration.
In general we recommend to adjust your phone in the middle position then you adjust
your headset according to the environment.
9. Ending a Call
You have two possibilities to end a call. Either directly on your phone or from your
headset.
1/ On your phone
You cut the line on your phone then you wait until your dongle and your headset return
to standby mode. Please refer to the appendix for profile 4.
2/ From your headset
You can only have this option if, of course, you could previously take the call with your
headset.
To end a call from BlueTrek keep pressed any button on the headset until you hear a bi-
tone. The headset and the dongle return to standby mode.
Page 12 of 16
Innovi Technologies Ltd
Suite 501-3, 5/F, Chinachem Leighton Plaza, 29 Leighton Road, Causeway Bay, Hong Kong
Tel: [phone], Fax: [phone]
Email: [e-mail]
, Web: www.innovi.com