User Manual

Dongle User’Guide Aug02/BtrekRefV1/GpoV1
7. Incoming Call
Before you use for the first time your dongle please read carefully all details in the
appendix concerning your mobile.
The action you have to take depends on your phone. Basically there are two families :
7.1. Nokia and Ericsson phones
When you receive a call :
1- The green led flashes quickly (red led is used if the Battery Voltage is low) in
both side
2- A ring tone is played in the BlueTrek speaker
3- To answer the call press shortly any button on BlueTrek until you can hear a
bi-tone
4- Then the Voice connection is established,
5- The green led (or red led if voltage battery low) lights on continuously on the
dongle and with quick flashes on Bluetrek.
Comments
: in order to avoid any malfunctioning it is very important, when you have an
incoming call, to wait until you hear the ring in the headset and not on the phone. In
case you take the call when you hear the ring on the phone you might have some
problems. Actually when the phone rings, the dongle has to establish the link to the
headset before you can hear the ring in the headset. It can take few milliseconds to 1.5
seconds depending on the phone.
7.2. Others than Nokia or Ericsson
Basically you have to choices : automatic or manual answer.
7.2.1. Automatic answer
Put your phone into automatic answer. When you have an incoming call you have nothing
to do. Only waiting until you can hear in the headset the voice of your interlocutor.
7.2.2. Manual answer
When you have an incoming call you answer directly on your phone. Then you wait until
you can hear in the headset the voice of your interlocutor.
Comments for both types of answers
: depending on the phone you can have a
period of time between the automatic answer from the phone and the connection
establishement (from few milliseconds to 2 seconds).
Page 11 of 16
Innovi Technologies Ltd
Suite 501-3, 5/F, Chinachem Leighton Plaza, 29 Leighton Road, Causeway Bay, Hong Kong
Tel: [phone], Fax: [phone]
Email: [e-mail]
, Web: www.innovi.com