User's Manual

10. Incoming Call
When you receive a call:
1. The green led flashes quickly (red led is used if the Battery Voltage is low) on
BlueTrek headset
2. A ring tone is audible at the BlueTrek headset
To answer the call presses shortly any button on the BlueTrek Headset for about 1
second until you hear a tone. The light will flash green slowly (or red if battery is low)
on the BlueTrek Headset.
11. Transferring a Call to the Mobile Phone
Check your Mobile Phone user guide to see if your phone supports this feature and follow
instructions.
Remark: On some phones, you must switch OFF your Headset, and your mobile phone will give
you the option to retrieve the call on your phone.
12. Transferring a Call to the headset
When the mobile phone is receiving a call, to transfer the call to the headset:
1. Switch ON the BlueTrek headset,
2. Then press shortly any button on the BlueTrek headset,
3. A short tone is heard on the BlueTrek headset speaker,
4. The conversation can go on through the BlueTrek headset.
13. Troubleshooting guide
In general, the first thing you should do when encountering a problem that you cannot solve
with this manual, is to switch off your Headset and your mobile phone, and switch them on
again.
To find out more, please consult our website: www.bluetrek.com.
14. Guidelines for safe use
Read those guidelines before using your Headset.
- Do not drop or try to alter the shape of your Headset.
- Do not expose your Headset to liquid or moisture.
- Do not expose your Headset to extreme temperatures.
- Do not expose your Headset to fire or open flames.
- Do not try to disassemble your Headset. Service and Maintenance can only be
performed by authorized Bluetrek dealers.
- CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
- Keep your Headset away from dust and dirt.