WELCOME Thank you for purchasing a Bluetrek Bluetooth® headset. Before using this product, please charge your headset for 50 minutes and read the safety and quick start guide carefully. Please keep the sales receipt to obtain 1 year warranty from date of purchase. GET ASSISTANCE E-mail: support@bluetrek.
Your Carbon Smart headset performs the best when fully charged. When you hear a lowtone beep at regular intervals (the indicator light flashes in red), your headset needs to be recharged. It takes around 50 minutes to charge up. The fully charged battery has power for up to 4.5 hours of talk time or 4 hours of music streaming or up to 6 days of standby time. Charging the battery for 15 minutes provides up to 2.5 hours of talk time or up to 2.5 days of standby time.
English SWITCHING ON/OFF 1 Power button To conserve energy, your Carbon Smart headset will be switched off when it loses connection with your mobile phone for more than 20 minutes. Switching the button to “off” then to “on” position will wake up the headset instantly. LANGUAGE SELECTION 1 Off On Voice prompts of the headset are available in English, Spanish, Putonghua (Mandarin), French or in “beep” tone to remind you the status of the headset.
English PAIRING 1 Place the Carbon Smart and your mobile phone within 0.3 meter (1 foot) from each other. 2 Switch on your phone and switch to Bluetooth® discover mode (refer to your phone’s manual). 3 Switch on Carbon Smart, press and hold the TALK Button for approx. 8 seconds until blue and red light flash alternately. 4 “BLUETREK CARBON SMART” will be displayed on your mobile phone. 5 Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000, then press “yes” or “ok”.
English FITTING ERGOBUD® ADVANCE Choose a earbud that best fits the size of your ear. The earbud can be rotated front and back on the speaker to optimize your wearing comfort. M L S EAR HOOK The ear hook may help further secure the headset on your ear. REMOVABLE PEN CLIP To carry the Carbon Smart headset when not in use, clip it to your pocket or anywhere on your shirt.
English MAKING CALLS Using the mobile phone key pad • Make sure the headset is connected with your phone and in stand-by mode. • Dial the number on the phone keypad, after approximately 2 seconds the audio connection will be established. Using the voice recognition function of your mobile phone* • Make sure the voice recognition function on your mobile is activated and your voice tags have been recorded on the phone. Please refer to your phone manual.
English ANSWERING CALL If the headset is powered on: Press once the Talk Button. If the headset is powered off: Switch on the headset, the call will be put through automatically. TALK Button On ENDING CALL Press Once the TALK Button. LISTENING TO MUSIC Carbon Smart is capable of streaming music over Bluetooth® either from a mobile phone or any other Bluetooth® device supporting A2DP.
Connecting with two Bluetooth enabled devices simultaneously. Enable the multi-point function 1. Pair the headset to the 1st device (Please refer to “pairing” section). 2. Press and hold the TALK button for about 8 seconds to enter into paring mode, then pair it to the 2nd device (Please refer to “pairing” section). 3. Press once the TALK button again. The 2 devices will be connected simultaneously.
English VOICE ALERT A recorded voice reminds you of the status of your headset, such as: low battery, pairing, last outgoing number redial, mute, un-mute etc… You can select the languages from first switch on the headset. 4 languages are available for this headset: English, Spanish, Putonghua (Mandarin) and French. You may also select the “beep” tone alert. To change the voice alert language, please reset your headset.
Wait for around 7 sec, the headset will be reset and enter into pairing mode directly. *Reset the headset will delete all pairing information, you will need to pair your devices again MORE INFORMATION & SUPPORT Some features of your Carbon Smart headset may not work on your mobile phone if it does not support the handsfree or headset Bluetooth profiles. Please check with your phone manufacturer for further details, or go on our website www.bluetrek.
English Important safety and operational information Please read the following information before using the headset. Additional warnings may be present on the product, packaging or in the user manual. • For optimal performance, wear your headset and your mobile phone on the same side of your body or within line of sight and angle the headset so that it points toward your mouth. • For better performances, avoid the microphone touching your jaw or face.
