Users Manual

Page | 54
9. Select “Tags Units” to apply tags to selected units.
The “Apply Tags” dialog box appears as shown in FIGURE 55.
Select the tags desired and click “OK”.
FIGURE 55
MANAGING DER DATA
VIEWING UNIT DER DATA
Click on the “Units” button at the top left of the screen to return to the home screen (Index
page). By default, this screen displays a graph (“Chart” view), FIGURE 56.
The chart displays the cumulative kilowatt-hours produced for EACH unit within your
organization measured since the last system reset. In general this will be from the time the
units were provisioned.
FIGURE 56