Users Manual
Page | 51
APPLYING BATCH ACTIONS TO UNITS
1. Select “Units” at the top left of the screen.
2. Select the “Table” view at the top right of the screen.
3. Select filters if necessary and click “Apply” to narrow your search.
4. Check the boxes to the left of the units you wish to apply batch actions to. Checking
the top box selects all boxes in the list.
5. Select the “Batch Actions” button as shown in FIGURE 48.
FIGURE 48
6. Select “Open Relay” to open the internal ConnectDER relay on selected units. A
“Relay Open requested” message appears for five seconds as shown in FIGURE 49.
The relay will open at the top of the next hour.
FIGURE 49