Users Manual

Page | 46
VIEWING UNIT INFORMATION
1. Select “Units” at the top left of the screen.
2. Select the “Table” view.
3. Select filters if necessary and click “Apply” to narrow your search.
4. Click on the individual unit’s serial number.
5. Unit information and map appear. It may be necessary to scroll down to view the
entire page. See FIGURE 47.
FIGURE 47
TABLE 6 – DESCRIPTION OF UNIT INFORMATION
Info Description
UNIT S/N
Unit serial number, assigned at the factory.
MODEL NUMBER
Unit model number, assigned at the factory.
METER FORM
Unit meter form (2S or 12S) assigned at the factory.
INSTALL DATE
The date the unit was provisioned.
INSTALLER
E-mail address of the installer who provisioned the unit.
SAMPLE RATE
The time interval (in minutes) that the unit takes a measurement
and stores the data for periodic reporting.
REPORT RATE
The time interval (in minutes) that the unit reports its collection
of data to the ConnectDER Could database.
CREATED AT
Date and time (UTC) the unit was created in the Cloud database.