Users Manual

Page | 33
7. Select “Edit”. Only the items editable by an installer will appear as shown in
FIGURE 28.
FIGURE 28
8. Fill in the Address, City, State, and Zip Code. The Premises ID, Location Notes, and
DER Type are optional. They may be filled in later at the discretion of a user with
“Admin” account privileges.
9. Select “Update”. Verify all information is correct.
10. Select theProvisionbutton.
11. Confirm “Provision Requested” is at the top of the screen. The initial status will
display “Provisioning”, then change to “Operational” after communications with the
ConnectDER Cloud is established. See FIGURE 29 on the next page.
i
NOTE
“Address”, “City”, “State”, and “Zip “are
required to be populated in order to
provision the unit.
The Premises ID is intended to be the
single unique identifying key linking
UNITS to the existing customer
information or meter data systems.
The Premises ID may be any unique
identifier the utility chooses. It may be
edited by both the Admin and Installer
user accounts.