Users Manual

ME910C1 HW User Guide
1VV0301351 Rev.13 Page 39 of 106 2020-06-30
NOTE:
The ON_OFF*/WAKE* can be kept low for 5 instead of 6 secs and
delays to start AT commands reduced to 1s on following SW
releases:
30.00.xx2
30.00.xx3
30.00.xx4
A flow chart showing the AT commands managing procedure is displayed below:
“Start AT CMD”
START
Delay = 300 msec
Enter AT <CR>
GO TO
“HW Shutdown
Unconditional”
AT answer in
6 sec ?
GO TO
“Modem ON Proc.”
“Start AT CMD”
END
Y
N