Installation manual

MFC INSTALLATION MANUAL Page 5 of 22
CONNECT
2
CAR.COM
It is also recommended that you use very short timeouts for accessories that
control electro-mechanical devices or features e.g. ignition, windows, sunroof,
linear actuators etc.
1.3.4 LOST CONNECTION SETTINGS
The SOFTDASH interface by default will automatically turn off all the accessory
outputs once the user control device has been disconnected either via data
cable or is out of Bluetooth connection range. This setting can be over ridden
from the configuration settings. It can be configured per accessory and a [WAIT
FOR RECONNECT] time can be set so as to control how long the unit will wait
for the user before engaging into the safe mode. It is recommended that you
do not disable the safe mode for accessories that control electro-mechanical
devices or features e.g. ignition, windows, sunroof, linear actuators etc.
1.4 Technical Support
For all technical support please contact Connect2Car Inc. via
[e-mail]. Your questions will be prioritized and responded to in a
professional and prompt manner. Please also check out the FAQ section on the
website at
www.connect2car.com
1.5 GLOSSARY OF TERMS AND ABBREVIATIONS
ABBREVIATION DESCRIPTION
MFC MULTI-FUNCTION-CONTROLLER UNIT
OEM ORIGINAL EQUIPMENT MANUFACTURER
GND ELECTRICAL VOLTAGE GROUND REFERENCE POINT
PDA PERSONAL DIGITAL ASSISTANT
FAQ FAVORITE ASKED QUESTIONS