Installation manual

Installation Manual
Connect2Car Anywhere GSM Kit
www.connect2car.com
19
Figure 11 Wire test matrix for ignition wire
11.4. Black/White Wire (Pin11) ENGINE ENABLE/DISABLE output (ALSO
FOR FUEL CUTOFF OR ANY OTHER KILL SWITCH:
This wire (black/white) is the Engine disable wire.
Connection:
The pin-11 (black/white) terminal should be connected to a relay. This is an output terminal. This relay can
then be used to disable the electrical ignition to the vehicle and or the fuel pump power line, depending
on the level of security you are looking for. This wire will activate (with a –ve ground output 100ma) and
stay on continuously when triggered from the phone. The wire will become open when deactivated.
 EXAMPLE 1: IGNITION DISABLE ONLY
Figure 12 Electrical Ignition disable Example