Installation manual

Installation Manual
Connect2Car Anywhere GSM Kit
www.connect2car.com
10
2.4. The Text Message Control Interface
The unit can also be controlled by sending a text message from the Authorized phone number to the units
assigned phone number.
• The units assigned phone number is provided to you upon activation of your device if you are using a
Connect2Car assigned SIM card. If you are using this unit with your own GSM sim card, the assigned
phone number is the phone number of the SIM card you place in the unit.
• The Authorized phone number is the number you provided to Connect2Car upon purchase of your unit.
To change the authorized phone number on your unit account, email [e-mail] or call
the support line at 914-239-3826
To control the unit, send a text message to the assigned phone number using the reference below. E.g to
lock the door, text Lock to the assigned number. The commands are case sensitive and they only work when sent
from the authorized phone number. You can cut out the card below and keep it handy for reference:
New commands: Software 2_13 and up or units purchased after 02/30/2009.
Arm - Arms the unit without locking the doors.
Disarm – Disarms the unit without locking the doors.