Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 1. DISCLAIMER ...............................................................................................................................4 1.1. COPYRIGHT .......................................................................................................................................................................... 4 1.2. SAFETY ISSUES ......................................................................................
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 11.3. Blue Wire (Pin13) / IGNITION INPUT WIRE: ........................................................................................................... 18 11.4. Black/White Wire (Pin11) ENGINE ENABLE/DISABLE output (ALSO FOR FUEL CUTOFF OR ANY OTHER KILL SWITCH: ..............................................................................................................................................................................
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 1. DISCLAIMER The information contained in this document is accurate at time of release. However, as Connect2Car Inc, is committed to continued research and development activities, these specifications may change from time to time. The present manual by Connect2Car Inc reflects the present state of the art of the products described therein.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 2. SYSTEMS OVERVIEW: 2.1. About the Connect2Car Anywhere Hardware Device The ANYWHERE GSM KIT is specially designed to interface with any vehicle to instantly empower Remote Control of the Vehicle conveniently with a mobile phone as well as Remote tracking/monitoring. The hardware utilizes any available GSM network to communicate with the controlling master (owner) as well as the Connect2Car data logging server.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 2.1.1. Other optional hardware that might be needed for Installation 2.1.1.1. Remote Starter or Remote Starter and Alarm System The Connect2Car unit works with any existing alarm installation in the vehicle. E.g. the Connect2Car system can be connected to monitor the Alarm siren output to notify user of Alarm status.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 2.2. About the Software Controller Once the kit is installed in the vehicle, it can then be controlled using the ANYWHERE software which is installed on any java supporting mobile phone. This software makes it possible for the user to issue commands to the vehicle and as well receive messages from the vehicle. The ANYWHERE software is a highly user friendly and therefore very easy to use.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 2.3. About the web controller interface The Connect2Car ANYWHERE can also be controlled from the web controller interface if the user has access to an internet enabled computer or device. Simply visit www.anywheretracking.com and log in with your account credentials. Your account information is provided when you register your device unto the connect2car server. To register a new device you can easily visit www.connect2car.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 2.4. The Text Message Control Interface The unit can also be controlled by sending a text message from the Authorized phone number to the units assigned phone number. • The units assigned phone number is provided to you upon activation of your device if you are using a Connect2Car assigned SIM card. If you are using this unit with your own GSM sim card, the assigned phone number is the phone number of the SIM card you place in the unit.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com Connect2Car Anywhere Software on a Mobile Device.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 2.5. How it works The ANYWHERE GSM KIT is simply a GSM based communication device that interfaces with the vehicle hardware controls like an alarm system. It has an onboard GPS unit to obtain precise GPS location information. It maintains two way communication between the owner and the vehicle to give up to date status of the vehicle.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 3. INSTALLATION CONSIDERATIONS: First thing to do: You are required to go through the entire contents of this manual before the commencement of installation. A good understanding of which control wires are to be used and their functions is essential. 4. Mounting the module: The ANYWHERE GSM MODULE should be mounted in any well hidden location within the vehicle compartment.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com The audio microphone should be mounted in a good location where it can properly pick voice signals within the vehicle. It should not be too exposed and at the same time should not be hidden, instead it should be disguised somewhere in a central location within the vehicle. E.g. dashboard, behind the back seat mid way between the two speakers (this location is usually affected by the speakers if the sound system is on).
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 8.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 9. Guideline of system features to install. The Connect2car Anywhere G2 kit can perform various functions depending on what your primary objective is. Some people want the remote security operations of GPS tracking and disabling of the vehicle or the convenience of remote control functions such as remote engine start, door lock/unlock, while some want all the features active.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com Step 3: Position all the accessories in their most suitable positions and extend their wires to the central point where the device is to be mounted. Step 4: Link the wires from the 16-pin connectors to their appropriate harnesses in the vehicle ensuring that the connections are firm. (Don’t forget to insulate every wire connection properly).
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com Figure 10 The 16 Pin Connector 11. Wiring Descriptions 11.1. Brown Wire GROUND WIRE (Pin16): This wire (brown) supplies negative ground to the Device. This terminal must be connected properly in order to prevent malfunctioning of the system. Connection: The pin-16 terminal from the device should be connected to the metal frame of the vehicle using an existing machine threaded fastener.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com Figure 11 Wire test matrix for ignition wire 11.4. Black/White Wire (Pin11) ENGINE ENABLE/DISABLE output (ALSO FOR FUEL CUTOFF OR ANY OTHER KILL SWITCH: This wire (black/white) is the Engine disable wire. Connection: The pin-11 (black/white) terminal should be connected to a relay. This is an output terminal.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com In this example the fuel cut/Engine disable wire is used to disable the electrical ignition of the vehicle. This produces an instant disabling effect of a moving vehicle, since the engine shuts down immediately and vehicle will not restart until the Engine is enabled by the owner/controller.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 11.5. Red/White Wire (Pin9) REMOTE START/STOP ACTIVATION output: This wire (red/white) is the remote start/stop activation wire. Connection: The pin-12 (red/white) terminal should be connected to the “start activation” terminal of an already installed and working remote start device. Through this terminal, the device can remotely start or stop the engine when it receives a remote start command from the phone interface.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com Figure 15 Door Lock/Unlock using a Remote Starter with Trigger input Figure 16 Direct Connection to Negative Door Lock System/Trigger Figure 17 Direct Connection to Positive Door Lock Triggers 11.8. White Wire / ARM TRIGGER WIRE (Pin12) input (+ve): This wire (white) is the Arm Monitor wire. Once the Anywhere Device detects an armed pulse, it puts itself in the armed state.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com Doors/Trunk/Hood/Ignition/Alarm siren. The disarm command is also activated anytime you send the unlock command via the phone interface. In essence this input synchronizes the Anywhere unit with your factory alarm system, incase you disarm/arm the car with your local key fob unit when you are in range of the vehicle.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com Hint: You can just connect this to the power wire (red) pin-15 11.13. Orange Wire (Pin2) NOT CONNECTED: 11.14. Green Wire Zimi Proximity Detect Wire (Pin14): This wire is used to detect the Bluetooth proximity trigger for the Connect2Car Zimi add on module. www.connect2car.com/zimi 11.15. Green/White Wire NOT CONNECTED (Pin3): Leave Disconnected. Do not connect this wire. 11.16.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com 12.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com TECHNICAL DATA Technical specifications of GSM/GPRS engine Frequency bands: Quad band: EGSM 900, EGSM 850, GSM 1800, GSM 1900 Compliant to GSM Phase 2/2+ GSM class: Small MS Transmit power: Class 4 (2 W) at EGSM900 and GSM850 Class 1 (1 W) at GSM1800 and GSM 1900 GPRS connectivity: GPRS multi-slot class 10 GPRS mobile station class B DATA: GPRS GPRS data downlink transfer: max. 85.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.com Technical specifications of GPS receiver GPS features: OEM single board high sensitive 20 channel GPS receiver, L1 1575.42 MHz, C/A code 1,023 MHz chip rate. GPS receiver with SiRFstarIII chip set Processor type ARM7/TDMI SiRF GSW3 Horizontal position accuracy: Autonomous < 2.5 meters. SBAS <2.0 meter Datum: WGS-84.
Installation Manual Connect2Car Anywhere GSM Kit www.connect2car.
