User manual

Installation
4. Plug t he USB mass storage device into the
adapter.
5. Power on the ad apter.
6. Note the color of th e Adapter Status LED.
Solid yellow indicates that the firmware
upgrade is in prog ress. Wait until the
LED changes color.
Blinking green indicates that the
firmware was successfully updated.
Go to step 7.
Blinking red indicates that the firmware
update failed. Go to step 9.
7. If the LED is blinking green, power off the
adapter, and reconnect the USB and GPIB
cables. (See page 8, Connecting Cables .)
8. Power on the ada pter, and verify that the
Adapter Status LED is solid green. This
completes the fi rmware update procedure.
12 TEK-USB-488 GPIB to USB Adapter User Manual