User manual

5
Console Connection
Before installation, make sure all devices and computers
to be connected to the USB KVM switch have been turned
off.
Plug a monitor to the Console's VGA port; plug a USB
keyboard and a USB mouse to any two of the Console's
USB ports as shown in figure 2.
For USB-4 only: As an option, a Master Connect-Tek
Millennia PS/2 KVM 4 port switch can be linked to the
USB-4 with a mini-DIN8 male-to-male cable. The USB-4
can operate as USB-peripheral sharing device.
Figure 2. Console Connection