Specifications

Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series
Cables
Cable
Description
012-0991-xx
GPIBCable(1m)
012-0991-xx
GPIBCable(2m)
Test F i xtures
Fixture Description
067-1686-xx
Probe Calib ration / Power Deskew Test Fixture
TDSUSBF Test fixture for use with Opt. USB
TF-GBE-BTP Basic test package for 10/100/1000BASE-T Ethernet
tests
TF-GBE-ATP A dvanced test package for 10/100/1000BASE-T
Ethernet (includes 1000BASE-T jitter test channel cable)
TF-GBE-EE Additional test fixture for Energy Efficient Ethernet
measurements. Order through Crescent Heart Software
(http://www.c-h-s.com)
Adapters
Adapter Description
P6701B
Optical/Electrical Converter (Multi Mode)
P6703B
Optical/Electrical Converter (Single Mode)
Instrument Up grades
To upgrade your MSO/DPO5000 Series oscilloscope, order DPO-UP and option
listed below. For example, DPO-UP DDRA.
Option
Description
To upgrade record length:
RL02E
From Standard Configuration to Opt. 2RL Configuration
RL05E
From Standard Configuration to Opt. 5RL Configuration
RL010E
From Standard Configuration to Opt. 10RL Configuration
RL25E
From Opt. 2RL Configuration to Opt. 5RL Configuration
RL210E
From Opt. 2RL Configuration to Opt. 10RL Configuration
RL510E
From Opt. 5RL Configuration to Opt. 10RL Configuration
To upgrade MSO /DPO 5000 Series with:
DDRA*
2
Add Opt. DDRA
DJAE
Add Opt. DJA – Jitter and Eye Analysis Tools - Advanced
(DPOJET)
ET3*
3
Add Opt. ET3 – Ethernet Compliance Testing
LT
Add Opt. LT – Waveform Limit Testing
MTM
Add Opt. MTM – Mask Testing
PWR
Add Opt. P WR – Power Measurement and Analysis
SR-COMP Add Opt. SR-COMP – Computer Serial Triggering and
Analysis (RS-232/422/485/UART)
SR-CUST Add Opt. SR-CUST – Customer Serial Analysis Kit for
Developers
SR-EMBD Add Opt. SR-EMBD – Embedded Serial Triggering and
Analysis (I
2
C, SPI)
SR-USB Add Opt. SR-USB – USB 2.0 Serial Triggering and
Analysis (LS, FS, HS)
SVEE Add Opt. SVE – SignalVu Essentials - Vector Signal
Analysis Software
SVM*
4
Add Opt. SVM – SignalVu General-purpose Modulation
Analysis
SVP*
4
Add Opt. SVP – SignalVu Pulse - Advanced Signal
Analysis
SVT*
4
Add Opt. SVT – SignalVu Settling Time Measurements -
Frequency and Phase
USB*
5
Add Opt. USB – USB 2.0 Compliance Testing
VETE
Add Opt. VET – Visual Trigger and Search
VNM
Add Opt. VNM – CAN/LIN Serial Protocol Decode
To upg rade DPO5000 Series with :
MSOE Add 1 6-digital channels to a DPO5000
*
2
Requires Opt. DJA. Available on 1 GHz and 2 GHz models only.
*
3
Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture.
*
4
Requires Opt. SVE.
*
5
Requires TDSUSBF (USB Test Fixture). 2 GHz bandwidth required for high-speed USB.
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
www.tektronix.com 21