Specifications

Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series
Options
Record Leng th Options
Option M SO5034
DPO5034
MSO5054
DPO5054
MSO5104
DPO5104
MSO5204
DPO5204
Opt. 2RL 25M/Ch 50M max, 25M/Ch
Opt. 5RL 50M/Ch 125M max, 50M/Ch
Opt. 10RL 125M/Ch 250M max, 125M/Ch
Software Options
Option
Description
Opt. DDRA*
2
DDR Memory Bus Analysis
Opt. DJA Jitter and Eye Analysis Tools – Advanced (DPOJET)
Opt. ET3*
3
Ethernet Compliance Testing
Opt. LT Waveform Limit Testing
Opt. MTM
Mask Testing
–ITU-T(64Kb/sto155Mb/s)
– ANSI T1.102 (1.544 Mb/s to 155 Mb/s)
– Ethernet IEEE 802.3, ANSI X3.263 (125 Mb/s to
1.25 Gb/s)
– Sonet/SDH (51.84 Mb/s to 622 Mb/s)
– Fibre Channel (133 Mb/s to 2.125 Gb/s)
– Fibre Channel Electrical (133 Mb/s to 1.06 Gb/s)
–USB(12Mb/sto480Mb/s)
– IEEE 1394b (491.5 Mb/s to 1.966 Gb/s)
–RapidI/OSerial(upto1.25Gb/s)
– Rapid I/O LP-LVDS (500 Mb/s to 1 Gb/s)
– OIF Standards (1.244 Gb/s)
– CPRI, V4.0 (1.228 Gb/s)
– Video (143.18 Mb/s to 360 Mb/s)
Opt. PWR
Power Measurement and Analysis
Opt. SR-COMP Computer Serial Triggering and Analysis
(RS-232/422/485/UART)
Enables triggering on packet-level information on
RS-232/422/485/UART buses as well as analytical tools
such as digital views of the signal, bus views, packet
decoding, search tools, and packet decode tables with
time stamp information.
Signal Inputs – Any Ch1 - Ch4 (and any D0 - D15 on
MSO models)
Recommended Probing – RS-232/UART: Single ended;
RS-422/485: Differential
Opt. SR-CUST Custom Serial Analysis Kit for Developers
Opt. SR-EMBD Embedded Serial Triggering and Analysis (I
2
C, SPI)
Enables triggering on packet-level information on I
2
C
and SPI buses as well as analytical tools such as
digital views of the signal, bus views, packet decoding,
search tools, and packet decode tables with time stamp
information.
Signal Inputs – I
2
C: Any Ch1 - Ch4 (and any D0 - D15 on
MSO models); SPI: Any Ch1 - Ch4 (and any D0 - D15
on MSO models)
Recommended Probing – I
2
C, SPI: Single ended
Option
Description
Opt. SR-USB USB 2.0 Serial Triggering and Analysis (LS, FS, HS)
Enables triggering on packet-level content for low-speed,
full-speed, and high-speed USB serial buses. Also
enables analytical tools such as digital views of the
signal, bus views, packet decoding, search tools, and
packet decode tables with time stamp information for
low-speed, full-speed, and high-speed USB serial buses.
Signal Inputs – Low-speed and Full-speed: Any Ch1
- Ch4 (and any D0 - D15 on MSO models) for single
ended, Any Ch1 - Ch4 for differential; High-speed: Any
Ch1 - Ch4
Recommended Probing – Low-speed and Full-speed:
Single ended or differential; High-speed: Differential
USB high-speed supported only on MSO5204,
DPO5204, MSO5104, and DPO5104 models.
Opt. SVE SignalVu E
ssentials – Vector Signal Analysis Software
Opt. SVM*
4
SignalVu G
eneral-purpose Modulation Analysis
Opt. SVP*
4
SignalVu P
ulse – Advanced Signal An alysis
Opt. SVT*
4
SignalVu S
ettling Time Measurements – Frequency and
Phase
Opt. USB*
5
USB 2.0 Compliance Testing
Opt. VET Visual Trigger and Search
Opt. VNM CAN/LIN Protocol Analysis Software
Bundle Options
Opt. PS1 Power Solution Bundle: DPOPWR, P5205A, TCP0030,
TPA-BNC, 067-1686-xx (Deskew Fixture)
Floating Option Licenses
Floating licenses offer an alternative method to manage your Tektronix asset.
Floating licenses allow license-key enabled options to be easily moved among
all your MSO/DPO5000, DPO7000, and DPO/DSA/MSO70000 Series Tektronix
oscilloscopes. Floating licenses are available for the following license-key enabled
options.
Check www.tek.com/products/oscilloscopes/floatinglicenses for additional
information about floating license options.
DPOFL-DDRA*
2
DDR
Memory Bus A nalysis
DPOFL-DJA Jitter and Eye Analysis Tools – Advanced (DPOJET)
DPOFL-ET3*
3
Ethernet Compliance Testing
DPOFL-LT Waveform Limit Testing
DPOFL-MTM
Ma
sk Testing
DPOFL-PWR
Po
wer Measurement and Analysis
DPOFL-SR-COMP Computer Serial Triggering and Analysis
(RS-232/422/485/UART)
DPOFL-SR-CUST Custom Serial Analysis Kit for D evelopers
DPOFL-SR-EMBD Embedded Serial Triggering and Analysis (I
2
C, SPI)
DPOFL-SR-USB USB 2.0 Serial Triggering and Analysis (LS, FS, HS)
DPOFL-SVE SignalVu Essentials – Vector Signal Analysis Software
DPOFL-SVM*
4
SignalVu General-purpose Modulation Analysis
DPOFL-SVP*
4
SignalVu Pulse – Advanced Signal Analysis
DPOFL-SVT*
4
SignalVu Settling Time Measurements – Frequency and
Phase
DPOFL-USB*
5
USB 2.0 Compliance Testing
DPOFL-VET Visual Trigger and Search
DPOFL-VNM CAN/LIN Protocol Analysis Software
*
2
Requires Opt. DJA. Available on 1 GHz and 2 GHz models only.
*
3
Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture.
*
4
Requires Opt. SVE.
*
5
Requires TDSUSBF (USB Test Fixture). 2 GHz bandwidth required for high-speed USB.
www.tektronix.com 19