Specifications

Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series
Software
Software
Description
NI LabVIEW
SignalExpress Tektronix
Edition
A fully interactive measurement software environment
optimized for the MSO/DPO5000 Series, enables
you to instantly acquire, generate, analyze, compare,
import, and save measurement data and signals using
an intuitive drag-and-drop user interface that does not
require any programming.
Standard MSO/DPO5000 Series support for acquiring,
controlling, viewing, and exporting your live signal data
is permanently available through the software. The full
version (SIGEXPTE) adds additional signal processing,
advanced analysis, mixed signal, sweeping, limit testing,
and user-defined step capabilities and is available for a
30-day trial period standard with each instrument.
IVI Driver Provides a standard instrument programming
interface for common applications such as LabVIEW,
LabWindows/CVI, Microsoft .NET and MATLAB.
IVI-COM standard
LXI Class C
Web Interface
Connect to the MSO/DPO5000 Series through
a standard web browser by simply entering the
oscilloscope's IP address in the address bar of the
browser. The web interface enables viewing of
instrument status and configuration, as well as status
and modification of network settings. All web interaction
conforms to LXI Class C specification
Display Characteristics
Characteristic
Description
Display Type Liquid-crystal active-matrix color display with touch
screen
Display Size Diagonal: 10.4 in. (264 mm)
Display Resolution
1024 horizontal × 768 vertical pixels (XGA)
Waveform Styles Vectors, Dots, Variable Persistence, Infinite Persistence
Color Palettes Normal, Green, Gray, Temperature, Spectral, and User
Defined
Display Format YT, XY
Comp
uter System and Peripherals
Characteristic
Description
Operating System
Windows 7 Ultimate 64-bit
CPU Intel Core 2 Duo, 2 GHz processor
PC System Memory 4GB
Hard Disk Drive
Removable hard disk drive, 160 GB capacity (2.5 in.
SATA)
Mouse
Optical wheel mouse, USB interface
Keyboard
Order 119-7083-xx for small keyboard; USB interface
and hub
Input/Output Ports
Port Description
USB 2 .0 High-speed
Host Ports
Supports USB mass storage devices, printers, keyboard,
and mouse. Two ports on front and four ports on rear of
instrument. Can be disabled individually
USB 1.1 Full-speed
Device Port
Rear-panel connector allows for communication/control
of oscilloscope through USBTMC or GPIB (with a
TEK-USB-488 adapter)
LAN Port
RJ-45 connector, supports 10/100/1000BASE-T
Video Out Port DB-15 female connector, connect to show the
oscilloscope display on an external monitor or projector.
Support for extended desktop and clone mode
Audio Ports Miniature phono jacks
Keyboard Port
PS/2 compatible
Mouse Port
PS/2 compatible
Auxiliary Input
Front-panel B NC connector. Input impedance 1 M.
Max input 300 V
RMS
with peaks  ±425 V
Auxiliary Out
(Software switchable)
Trigger Out: A TTL compatible pulse when the
oscilloscope triggers
Time Base Reference Out: A TTL compatible output of
internal 10 MHz reference oscillator
External Reference In
Time base system can phase lock to an external 10 MHz
reference (10 MHz ±1%)
Probe Compensator
Output
Front-panel pins
Amplitude: 2.5 V
Frequency: 1 kHz
LAN eXtensions for Instrumentation (LXI)
Characteristic
Description
Class LXI Class C
Version V1.3
Power Source
Characteristic
Description
Power Source Voltage 100 to 240 V ±10%
Power Source
Frequency
45 Hz to 66 Hz (85 to 264 V)
360 Hz to 440 Hz (100 to 132 V)
Power Consumption
275 W maximum
Optional TekVPI
®
External Power Supply*
1
Characteristic
Description
Output Voltage
12 V
Output Current
5A
Power Consumption
50 W
*
1
Required when total oscilloscope probe power usage exceeds 12 W.
Physical Characteristics
Dimension
mm
in.
Height 233 9.16
Width 439 17.29
Depth 206 8.12
Weight kg lb.
Net 6.7 14.9
Shipping
12.5 27.5
Rackmount Configuration
5U
Cooling Clearance 2 in. (51 mm) required on left side and rear of
instrument
www.tektronix.com 17