Specifications

ManualsBrandsConnect-Tek ManualsComputer equipmentUSB-4

Mixed Signal Oscilloscopes

MSO5000, DPO5000 Series Data Sheet

Features & Beneﬁts

Key Performance Speciﬁcations

2 GHz, 1 GHz, 500 MHz, and 350 MHz Bandwidth Mod els

Up to 10 GS/s Real-time Sample Rate on One or Two Channels and

up to 5 GS/s on All Four Channels

Up to 250 Megapoint Record Length with MultiView Zoom™

>250,000 wfms/s Maximum Waveform Capture Rate with FastAcq™

FastFrame™ Segmented Memory Acquisition M ode with

>310,000 Waveforms per Second Capture Rate

Standard 1 0 M Passive Voltage Probes with Less than 4 pF Capacitive

Loading and 500 MHz or 1 GHz Analog Bandwidth

16 Digital Channels (MSO Series)

User-selectable Bandwidth Limit Filters fo r Better Low-frequency

Measurement Accuracy

Suite of A dvanced Triggers, with Op tional Visual Trigger

Ease-of-Use Features

Wave Inspector

Controls provide Easy Navigation a nd Automated

Search of Waveform Data

MyScope

Custom Control Windows and Right Mouse Click Menus for

Except

ional Efﬁciency

53 Auto mated Measu rement s, Waveform Histograms, and FFT Analysis

for Simpliﬁed Waveform Analysis

TekVPI

Probe Int erface supports Active, D ifferential, and Current

Probes for Auto matic Scaling and Units

10.4 in. (264 mm) Bright XGA Display with Touch S creen

Small Footprint and Lightweight – Only 8.12 in. (206 mm) Deep and Less

than 1 5 lb. (6.7 kg)

Connectivity

TwoUSB2.0H

ost Ports on the Front Panel and Four on the Rear

Panel for Quick and Easy Data Storage, Printing, and Connecting USB

Peripherals

USB Device Port on the Rear Panel for Easy Connection to a PC or

GPIB Control with an Adapter

Integrated 10/100/1000 BASE-T Ethernet Port for Network Connection

and Video Out Port to Export the Oscilloscope Display to a Monitor or

Projector

Microsoft

Windows 7 64-bit Operating System for Easy Connectivity

and Integration into Your Environment

LXI Class C Compliant

Mixed Sig

nal Design and Analysis (MSO Series)

Automated Triggering, Decode, and Search on Parallel Buses

Per-channel T hreshold Settings

MagniVu™ High-speed Acquisition provides 60.6 ps Fine Timing

Resolution on Digital Channels

Optional Serial Triggering and Analysis

Automated Serial Triggering, Decode, and Search Options for I

C, SPI,

RS-232/422/485/UART, an d USB

Automated Serial Decode and Vehicle Network Monitoring of CAN and

LIN

Optiona

l Technology Speciﬁc Analysis

Software Solutions provide Built-in Domain Expertise for Ethernet and

USB 2.0

Compliance Testing, Jitter, Timing, Eye Diagrams, Power, DDR

Memory Bus Analysis, and Wideband RF

Limit a

nd Mask Testing provide Quick Insight into Signal Characterist ics

Summary of content (24 pages)

PAGE 1
Mixed Signal Oscilloscopes MSO5000, DPO5000 Series Data Sheet 53 Automated Measurements, Waveform Histograms, and FFT Analysis for Simplified Waveform Analysis TekVPI® Probe Interface supports Active, Differential, and Current Probes for Automatic Scaling and Units 10.4 in. (264 mm) Bright XGA Display with Touch Screen Small Footprint and Lightweight – Only 8.12 in. (206 mm) Deep and Less than 15 lb. (6.7 kg) Connectivity Two USB 2.
PAGE 2
Data Sheet all channels and an optional record length of up to 250M points on two channels. With Wave Inspector® controls for rapid waveform navigation, and more than 10 optional software and analysis packages for common technologies and in-depth analysis tasks, the MSO/DPO5000 Series from Tektronix provides the feature-rich tools you need to simplify and speed debug of your complex design.
PAGE 3
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series Capture – Triggering on a specific transmit data packet going across an RS-232 bus. A complete set of triggers, including triggers for specific serial packet content, ensures you quickly capture your event of interest. Capture Discovering a device fault is only the first step. Next, you must capture the event of interest to identify root cause. Accurately capturing any signal of interest begins with proper probing.
PAGE 4
Data Sheet Analyze – Waveform histogram of a falling edge showing the distribution of edge position (jitter) over time. Included are numeric measurements made on the waveform histogram data. A comprehensive set of integrated analysis tools speeds verification of your design's performance. Analyze Verifying that your prototype's performance matches simulations and meets the project's design goals requires analyzing its behavior.
PAGE 5
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series Search step 1: You define what you would like to find. Digital phosphor technology enables greater than 250,000 wfm/s waveform capture rate and real-time color grading on the MSO/DPO5000 Series. User Marks Press the Set/Clear front-panel button to place one or more marks on the waveform. Navigating between marks is as simple as pressing the Previous (←) and Next (→) buttons on the front panel.
PAGE 6
Data Sheet With the color-coded digital waveform display, low values are shown in blue and high values are shown in green, enabling instant understanding of the bus value whether transitions are visible or not. You can set threshold values for each channel, enabling support for up to 16 different logic families. The MagniVu high-resolution record provides 60.6 ps timing resolution, enabling you to make critical timing measurements on your digital waveforms.
PAGE 7
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series Eye Diagram triggering using optional Visual Trigger. The P6616 MSO probe offers two eight-channel pods to simplify connecting to your device. P6616 MSO Probe This unique probe design offers two eight-channel pods. Each channel ends with a probe tip featuring a recessed ground for simplified connection to the device under test. The coax on the first channel of each pod is colored blue making it easy to identify.
PAGE 8
Data Sheet Packet View display of decoded RS-232 messages. Event table showing decoded serial packet data in a long acquisition. Bus Decoding a software listing. Packets are time stamped and listed consecutively with columns for each component (Address, Data, etc.).
PAGE 9
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series CAN and LIN Timing and Protocol Decode. Switching Loss measurements. Automated power measurements enable quick and accurate analysis of common power parameters. USB 2.0 Compliance Testing. CAN and LIN Timing and Protocol Decode Software (Optional) The optional CAN/LIN serial analysis software package (Option VNM) enables you to ensure seamless and reliable operation of a CAN or LIN network.
PAGE 10
Data Sheet Mask testing an OC-12 signal, capturing any violations of the mask. Limit and Mask Testing (Optional) The optional limit test (Option LT) and mask test (Option MTM) software packages are useful for long-term signal monitoring, characterizing signals during design, and testing on a production line. The limit test software compares a tested signal to a known good or "golden" version of the same signal with user-defined vertical and horizontal tolerances.
PAGE 11
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series The MSO/DPO5000 Series' compact form factor frees up valuable space on your bench. MyScope custom control windows are created with a simple drag-and-drop process enabling each user to have a unique interface. menu button right on the probe itself. This button brings up a probe menu on the oscilloscope display with all relevant settings and controls for the probe.
PAGE 12
Data Sheet Capture data into Microsoft Excel using the unique Excel toolbar, and create custom reports using the Word toolbar. Remote Operation and Extended Analysis There are many ways to connect to your MSO/DPO5000 Series oscilloscope to conduct extended analysis. The first makes use of the 12 www.tektronix.com Windows Remote Desktop capability – connect directly to your oscilloscope and operate the user interface remotely through the built-in Remote Desktop.
PAGE 13
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series Characteristics Vertical System Analog Channels Characteristic MSO5034 DPO5034 MSO5054 DPO5054 MSO5104 DPO5104 MSO5204 DPO5204 4 500 MHz 1 GHz 2 GHz 700 ps 350 ps 175 ps ±1.5%, derated at 0.
PAGE 14
Data Sheet Horizontal System Analog Channels Characteristic MSO5034 DPO5034 MSO5054 DPO5054 MSO5104 DPO5104 MSO5204 DPO5204 5 GS/s 5 GS/s 5 GS/s 5 GS/s — — 10 GS/s 10 GS/s Maximum Sample Rate (All channels) Maximum Sample Rate (1 or 2 channels) Maximum Equivalent Time Sampling Rate Maximum Record Length with Standard Configuration Maximum Record Length with Option 2RL Maximum Record Length with Option 5RL Maximum Record Length with Option 10RL Maximum Duration at Highest Real-Time Sample Rate
PAGE 15
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series Trigger Modes Mode Description Edge Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, AC, HF reject, LF reject, and noise reject Trigger on or reject glitches of positive, negative, or either polarity.
PAGE 16
Data Sheet Trigger Characteristics Waveform Measurements Characteristic Description Measurement Description Enhanced Triggering User-selectable; corrects the difference in timing between the trigger path and the acquired data (not available in FastAcq) Cursors Automatic Measurements Waveform and Screen 53, of which 8 can be displayed on-screen at any one time.
PAGE 17
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series Software Software Input/Output Ports Description NI LabVIEW A fully interactive measurement software environment SignalExpress Tektronix optimized for the MSO/DPO5000 Series, enables Edition you to instantly acquire, generate, analyze, compare, import, and save measurement data and signals using an intuitive drag-and-drop user interface that does not require any programming.
PAGE 18
Data Sheet Ordering Information Environmental Characteristic Temperature Operating Nonoperating Humidity Operating Nonoperating Altitude Operating Nonoperating Regulatory Electromagnetic compatibility Certifications Description MSO/DPO5000 Family 5 °C to +50 °C –20 °C to +60 °C Product DPO5000 Models DPO5034 8% to 90% relative humidity with a maximum wet-bulb temperature of 29 °C at or below +50 °C (upper limit de-rates to 20.6% relative humidity at +50 °C).
PAGE 19
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series Options Option Description Opt. SR-USB USB 2.0 Serial Triggering and Analysis (LS, FS, HS) Enables triggering on packet-level content for low-speed, full-speed, and high-speed USB serial buses. Also enables analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information for low-speed, full-speed, and high-speed USB serial buses.
PAGE 20
Data Sheet Power Plug Options Option Description Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. North America Universal European Union UK Australia Switzerland Japan China India Brazil No power cord A0 A1 A2 A3 A5 A6 A10 A11 A12 A99 User Manual Options Option Description Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.
PAGE 21
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series Cables Instrument Upgrades Cable Description 012-0991-xx 012-0991-xx GPIB Cable (1 m) GPIB Cable (2 m) Test Fixtures Fixture Description 067-1686-xx TDSUSBF TF-GBE-BTP Probe Calibration / Power Deskew Test Fixture Test fixture for use with Opt.
PAGE 22
Data Sheet 22 www.tektronix.
PAGE 23
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series www.tektronix.
PAGE 24
Data Sheet Contact Tektronix: ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 00800 2255 4835* Brazil +55 (11) 3759 7627 Canada 1 800 833 9200 Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835* Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835* Japan 81 (3) 6714 301