Specifications

Command Groups
Table 2-32: Ve rtical Commands (cont.)
Command Description
SELect:BUS<x> Turns on or off the specied bus waveform
or returns whether the specied bus channel
is on or off
SELect:CH<x> Turnsonoroffthespecied waveform or
returns whether the specied channel is on
or off
SELect:D<x> Turns on the display of the digital channel
<x> and resets the acquisition. <x > is the
channel number
SELect:CONTROl Sets or returns the waveform that is selected
as the implied recipient of channel-related
commands
SELect:MATH[1] Turns on or off the math waveform or returns
whether the math waveform is on or off
SELect:REF<x> Turnsonoroffthespecied reference
waveform or returns whether the specied
reference waveform is on or off
Waveform Transfer Command Group
Use the commands in the Waveform Transfer Command Group to transfer
wav
eform d ata points to and from the oscilloscope. Waveform data points are a
collection of v alues that dene a waveform. One data value usually represents
one data point in the waveform record. When working with envelope waveforms,
each data value is either the minimum or maximum o f a min/max pair.
2-50 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual