Specifications

Commands Listed in Alphabetical Order
TRIGGER:A:MOD
E?
might return :TRIGGER :A:MODE NORMAL indicating that a
valid trigger event must occur before a trigger is generated.
TRIGger:A:PULse? (Query Only)
Returns the A pulse trigger p arameters.
Group
Trigger
Syntax
TRIGger:A:PULse?
Related Commands
TRIGger:A:EDGE?, TRIGger:A:LOGIc?
Examples
TRIGGER:A:PULSE? might return :TRIGGER:A:PULSE:CLASS TRAnsITION
TRIGger:A:PULse:CLAss
Sets or returns the type of pulse on which to trigger.
Group
Trigger
Syntax
TRIGger:A:PULse:CLAss {RUNt|WIDth|T RANsition}
TRIGger:A:PULse:CLAss?
Related Commands
TRIGger:A:RUNT?, TRIGger:A:PULSEWIDth?, TRIGger:A{:TRANsition|:
RISEFall}?, TRIGger:A:TYPe
Arguments
RUNt triggers when a pulse crosses the rst preset voltage threshold but does not
cross the second preset threshold before recrossing the rst.
WIDth triggers when a pulse is found that has the specied polarity and is either
inside or outside the specied time limits.
TRAnsition triggers when a pulse crosses both thresholds in the same direction
as the specied polarity and the transition time between the two threshold
crossings is grea t er or less than the specied time delta.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-327