Specifications

Commands Listed in Alphabetical Order
IDANDDATA spec
ifies to search on the identifier and the data.
WAKEup specifies to search on wake up.
SLEEP specifies to search on sleep.
ERROR specifies to search on errors.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:B1:LIN:CONDITION? might return
SEARCH:SEARCH1:TRIGGER:A:B US:B1:LIN:CONDITION SYNCF IELD
indicating a search on the sync field.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue
Sets or returns the binary data string to be used for LIN searches if the search
condition is ID or IDANDDATA.
Conditions
This command requires a DPO2AUTO applic ation module.
Group
Bus
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:LIN:DATa:HIVALue
<QString>
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:LIN:DATa:HIVALue?
Arguments
<QString> is a quoted string of 1s, 0s, or Xs representing the binary data string
to be used for LIN searches if the search condition is ID o r IDANDDATA.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:B1:LIN:DATA:HIVALUE? might return
SEARCH:SEARCH1:TRIGGER:A:B US:B1:LIN:DATA:HIVALUE "X XXXXXXX"
indicating that the high value is don't care.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier
Sets or returns the LIN data qualifier. This only applies if the trigger condition is
IDANDDATA or DATA.
Conditions
This command requires a DPO2AUTO applic ation module.
Group
Bus
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-255