User manual

TS64A001
21
Maintenance
Maintaining ventilation
Your interactive at panel requires ventilation to enable the cooling-
fans to function. Dust buildup in the ventilation holes compromises
cooling and leads to product failure.
• Avoid setting up or using your interactive at panel in an area with
excessive levels of dust, humidity or smoke.
• Clean accessible ventilation holes monthly with a dry cloth. Use a
vacuum cleaner with a narrow hose end tting to clear the back
ventilation holes annually. You might have to remove the interactive
at panel from your wall.
Preventing condensation
• Your interactive at panel screen contains layers of glass that can
collect condensation, especially in the following conditions:
• Temperature extremes with high humidity
• Rapid changes in humidity, which can occur when you operate the
product near water, such as a sink, pool, kettle or air conditioner
ventilator
• Direct exposure to sunlight
To evaporate condensation from your interactive at panel
1. Remove the humidity source from the interactive at panel,
if possible.
2. Adjust the room temperature to normal operating ranges.
3. Turn on the interactive at panel for 2–3 hours.
If the screen condensation doesn’t evaporate, contact TAG Support
http://www.tecslate.com/contactsupport