Instruction manual

From the previous section, navigate to Equation using

is highlighted. Toggle through the available

until Equation

equations usin . Navigate off using or .

, d nt s

(numbers, letters and sym

at a glance, what is being measured or calculated. Characters are selected from

OL display or simply typed in

rom the previous section, navigate to Units using

4.2.2.3. Units (For Equation)

The units apply only to the equation. Additional units can be specified for

Input A and B escribed later in a subseque

with this constant. The unit label is then displayed to allow the user to know,

a pick list when programming from a TACHTR

when using TACHLINK.

ection. Up to 10 characters

bols) can be used to describe the units associated

until Units is highlighted. Depress

to make active. Toggle through the available characters using or . When the

first character is selected, depress

to move to the

adjacent character. Repeat use of

or to make the

next selection. Repeat this sequence up to 10 times. If at

anytime the user wishes to rem Units label,

depress Clear. hen complete depress

ove the

to exit from

change. Navigate off using

or . If no more changes are to be made on this page the

user may depress Prev,

, to exit and save changes as described in section 4.1.2.