Instruction manual

4.2.4.4 Output Switching / Setpoint Types
60
4.2.4.4.1 EA (Energize above setpoint)
61
4.2.4.4.2 EB (Energize below setpoint)
61
4.2.4.4.3 DA (De-energize above setpoint) 62
4.2.4.4.4 DB (De-energize below setpoint)
62
4.2.5 Analog Output (TP30 and TT30) Only 67
4.2.5.1 Analog Output Setup 67
4.2.5.1.1 Source
68
4.2.5.1.2 Range 69
4.2.5.1.3 Min / Max Value
69
4.2.5.2 Analog Output Calibration (TACHLINK ONLY)
70
4.2.6 Security
72
4.2.6.1 Alarm Reset
73
4.2.6.1.1 Tachometer Mode Alarm Reset
73
4.2.6.1.2 Counter Mode Alarm Reset
74
4.2.6.2 Alarm Hold-Off
75
4.2.6.3 Keypad/Keyboard Lock
77
4.2.6.3.1 Keypad Lock
77
4.2.6.3.2 Keyboard Lock 77
4.2.6.4 Display Address
78
4.2.6.5 Security Code
78
4.2.6.5.1 Creating / Changing a Security Code
79
4.2.6.5.2 Entering a Security Code
80
4.2.7 Verify
82
85
4.2.8 Diagnostics
4.2.9 Plotting (TACHLINK Only)
87
4.2.9.1 Plotting Setup
87
4.2.9.2 Plotting Output
89